projects

REGEO - Sketch-Based Modelling

The research Group REGEO has developed an intense activity around the Sketch-Based Modelling subject for years. The following research projects,PhD thesis and final projects of degree are the results:

Current projects done with public funds

Previous projects done with public funds

PhD theses

Final projects of degree

CURRENT PROJECTS DONE WITH PUBLIC FUNDS

Detection of desing intent in engineering sketches, and application at the sketch-based modelling
Start : 01/01/2011
End : 12/31/2013
Organization : UJI-Fundación Caixa-Castelló. (Pôsitively evaluated by A.N.E.P.)
Responsible : P. Company
Participants : P. Company, P.A.C. Varley, R. Plumed

ABSTRACT: This project is aimed at: a) catalog the cues currently used in the ambit of sketch-based modelling of industrial products, b) find those intentions of the design intent that can be perceived by way of cues contained in sketches, and c) design and implement a computer code able to perceive cues linked to thedesign intent and produce models from sketches, maintaining this design intent.

PREVIOUS PROJECTS DONE WITH PUBLIC FUNDS

CUESKETCH: Recognition of ideation sketches based in multi-agents.
Start : October, 1st, 2007
End : September, 30th, 2010
Organization : Ministry of Education and Science. National R+D+I Plan. (Ref. DPI2007-66755-C02-01)
Person in charge : N. Aleixos
Participants : 3

Subproject integrated together with the supbroject DPI2007-66755-C02-01, in the project “DOILY: Computer-Aided Sketching tools for Engineering Design”

Sketch-based Modeling System for Conceptual Design (SAMBODIC).
Start: November of 2004
End: November of 2007
Organization: Ministry of Education and Science. National R+D+I Plan, cofinanced by FEDER funds (European Union), (code DPI2004-01373)
Person in charge: M. Contero.
Participants : 6

Gestual interface for the introduction of parametric-variational sketches, and for the definition of assembly conditions in the aided design of industrial products.
Start: January of 2005
End: January of 2007
Organization: UJI-Fundació Caixa Castelló. Programa de fomento de proyectos de investigación 2002. (Code P1-1B2004-02)
Person in charge: N. Aleixos
Participants : 3

From sketch to model: New user interfaces for CAD systems.
Start: December of 2002
End: December of 2004
Organization: UJI-Fundació Caixa Castelló. Programa de fomento de proyectos de investigación 2002. (Code P1-1B2002-08)
Person in charge: P. Company
Participants : 3

Caligrafic Interfaces for Advanced Tools in Design.
Start: January 2002
End: December 2003
Organization: Generalitat Valenciana. Ayudas para Proyectos de I+D (Code CTIDIB/2002/51)
Person in charge: M. Contero.
Participants : 11

Reconstrucción de objetos tridimensionales a partir de representaciones bidimensionales.
Start: November of 1997
End: November of 1999
Organization: Generalitat Valenciana. Plan of Science and Technology. (Evaluated positively by ANEP.). Ref Gv97-ti-04-39
Person in charge: J.M. Gomis.
Participants : 6

PhD THESES

Title: Estudio del efecto de la aplicación de tecnología multimedia y del modelado basado en bocetos en el desarrollo de las habilidades espaciales.(5,1Mb)
PhD Student: José Luis Saorín Pérez
Director: M. Contero
Centre: Universidad Politécnica de Valencia. Departamento de Expresión Gráfica en la Ingeniería.
Date: Novembre, 2006

Title: Percepción Artificial de Dibujos Lineales. (5,1Mb)
Ph.D Student: Ana Piquer Vicent
Director: P. Company
Centre: Universidad Jaume I. Departamento de Tecnología./ Área de Expresión Gráfica en la Ingeniería. Programa de doctorado: Diseño Avanzado de Productos Industriales.
Date: September, 2003.

Title: Reconstrucción Geométrica de Sólidos Tridimensionales utilizando técnicas de Optimización. ( 4,4 Mb)
Ph.D Student: Julián Conesa Pastor
Directors: P. Company y J.M. Gomis
Center: Universidad: Universidad de Murcia. Facultad / Escuela: Dep. de Ingeniería Mecánica y Energética. Programa de doctorado: Métodos de Análisis y Diseño en Ingeniería Mecánica.
Date: July 2001

FINAL PROJECTS OF DEGREE

Title: Desarrollo, implementación y prueba de un algoritmo de reconstrucción de objetos a partir de una representación axonométrica, utilizando técnicas de optimización.( 1,9Mb)
Student: Juan Vicente Andreu Hernández
Director: P. Company Calleja
Center: Facultad de Informática. Universitat Politécnica de València
Date: July 2000

Title: Vectorización de planos de ingeniería por emparejamiento de contornos ( 5,4Mb)
Student: Miguel Angel Herreras Monzó
Director: J.M.Gomis, Mª C. Juan Lizandra
Center: Facultad de Informática. Universitat Politécnica de València
Date: November 1999

Title: Reconstrucción de modelos sólidos 3D a partir de vistas ortográficas 2D utilizando técnicas de combinación de cuerpos elementales. ( 5,6 Mb)
Student: Lorenzo J. Muñiz Márquez
Director: J.M. Gomis
Center: Facultad de Informática. Universitat Politécnica de València
Date: November 1998

Title: Reconstrucción 3D de Objetos Poliédricos a partir de su Representación Axonométrica Oblicua 2D. ( 34,8 kb)
Student: José García Resta
Director: J.M. Gomis
Center: Facultad de Informática. Universitat Politécnica de València
Date: April 1997

Please e-mail the Webmaster if you have problems downloading any of the documents. The downloadable documents above differ from final published versions in formatting and small detail. If you like to get a copy through e-mail, please send to the Webmaster the list of documents you want. Be sure to include your postal address.

WARNING: This page contains links to documents that may be covered by copyright. You may browse the documents at your convenience, in the same spirit as you may read a journal or a proceeding article in a public library. Retrieving, copying, distributing these documents may violate the copyright protection law.

Legal warning: Pedro Company, responsible of this assigned web space (http://www.regeo.uji.es), communicates to the visitors that he assumes responsibility for veracity, exactness and updating of contents here provided. In no case can take responsibility to the Universitat Jaume I for possible damages that may derive.

To view documents which are PDF files," Adobe Acrobat's Reader is required:

26.04.2011
Send any comments to: Webmaster